Skip to main content

About us

Let's talk mineral processing is a blog dedicated to spreading knowledge about mineral processing. Here are more focus on spreading knowledge about mineral metal and metal extraction. You will find intensely researched articles. We believe that knowledge is just information if it does not peer reviews. Therefore authors of lets talk mineral engineering take only that information which is peer-reviewed from reputed journals. 

This blog is not just limited to publish the review articles or summaries but also gives information about incoming webinars conferences and job postings. So if you have any information about these subjects then feel free to contact us. 

Thanks and regards 
Priyanka Roy 
Owner: let's talk mineral processing 

Comments

Popular posts from this blog

All about enhanced gravity separator: Falcon and Knelson Concentrator.

Separation of minerals from gangue using gravity separation technology is not recent, and humans are using it since the last 2000 years without much change in the process. Although growing technology in the previous century found various forces that could be used to extract minerals, gravity separation is not obsoleted from major mineral processing plants. For some minerals, it is even at least the primary stage for beneficiation. Inventors use a phenomenon where particles can be separated using the differential setting rates, which happened due to specific gravity posses by each particle. In the market, we can found several types of equipment to serve the mentioned purpose. For example, jigs, shaking concentrators, and flowing film concentrators. These equipment have proven capability in the industrial scale. Not only gravity separation is as comparable efficiency with other technology in mineral processing, but it also has some additional economic and environmental benefits. Gravity ...

Insights of Rake Arms in Classifiers.

https://www.tenova.com/fileadmin/ The miner processing plant is designed to beneficiate desirable mineral from the gangue, and for that, the ore should be crushed and ground up to the liberation size. Currently, the liberation size of most of the metal is below 200 microns. To benefit this ore, wet processing is in the heart of mineral processing, which caused lots of water content in the final products. For removal of liquid from the pulp or slimes, which is a mixture of solid particles and liquid are passed through the thickener.   Thickener is the device through which liquid gets separated. Earlier, this process is done by employing a cylinder to fill with the pulp and then rest for the sedimentation. Sedimentation cause settling of particle and then the water is removed, and solids get separate. However, this was the batch process and took a considerable time. Therefore, inventors tried to operate sedimentation in a continuous process. However, the continuous process is pra...

3 Things You Should Know About The Screen: Efficiency, Separation Profile, Capacity.

  When we talk about the screen, we can imagine a surface having an open unit area throughout its surface, in which a particle is fed on the Screens. Fed material move on the surface of the screen, if the apparent diameter of the feed particle is smaller than the diameter of the open unit area then the particle will report below else it will move forward and report on the other end(Overflow).   As we all known about the widespread use of screens around the all mineral processing plant. We can unequivocally say that each mineral processing plant consists screen on vary degree of use. In the market, we can found various types of screens for different purposes. Before installation, we must know the efficiency of the screen to get information about the performance profile of the equipment.   Moreover, screens can be a single surface- single deck or multiple decks depends on its use in a plant. Therefore, for a numerous deck, the underflow of the above screen is feed f...

Total Pageviews